OUT OF STOCK
- Crackle Glass Hurricane Shade 2 inch fitter x 6 5/8 x 3 7/8
- Height: 6 5/8 inches tall
- Width of Fitter end: 2 inches across
- Height of fitter: 3/4 inches
- Top Diameter: 3 7/8 inches across
Crackle glass replacement shade for your sconce, lamp, or candle holder. Traditional flared design in hand blown and cut crackle glass. Eye catching shade, heavy and intricate. Bottom fitter edge measures 2 inches across and has a short 3/4 inch neck. Flared top edge measures 3 7/8 inches across and stands 6 5/8 inches tall. Will add beauty to your wall sconce, candle holders or lamps.
Please measure your socket fitter very carefully prior to ordering. Even 1/8 inch difference in diameter can cause the glass to not fit.
This item is as new. Please note... it is very common for these shades to have a small ship around the top and/or bottom rims from when the shades are cut. In addition, there may be a vein or two in the crackle glass that appears to be more of a straight line crack, but the shade is not broken. The process of hand blowing these heavy weight shades and the crackling process can create imperfections. These shades also come in slightly different sizes. If you are matching to another shade in a set, double check the measurements of that shade against this one.
See all available Glass Lamp Shades and Hurricane shades here:
Browse more Home and Garden Categories here:
Measuring for a replacement shade:
A. height of the shade.
B. width of the shade's top rim
C. width of the shade's widest point
D. width of the shade's fitter measurement across the bottom, which would fit inside of the holders base.
E. height of the fitter. Some are short necked, some are taller. This would be the measurement from the very bottom up to the beginning of the bulged section.
Crackle Glass Hurricane Shade 2 inch fitter x 6 5/8 x 3 7/8 https://t.co/N84Sf0424i pic.twitter.com/bTxXmj4wMO
