|
|
$44.99
1 available |
Mens Work Shoe Steel Toe Slip Resistant Size 10.5 Black Leather
Made by Shoes for Crews, this style features steel safety toe that meets ASTM standards. This sturdy work shoe also has a water-resistant leather upper and effective slip-resistant traction. Equipped with electric shock-resistant soles and heels, the Cade steel toe boot also features a premium insole for added comfort.
|
|
|
$19.99
1 available |
Murano Hanging Candle Holder Sawtooth Rim Iridescent Marigold 6 3/8 x 4.5
Iridescent glaze candle holder made by Murano mimics slag glass in which light Marigold and white colors are swirled into the process while being hand blown. Sawtooth rim flares out and up, above stepping stone band that circles near the top. Holds votives or tealites and measures 4.5 inches tall and 6 3/8 inches at the top in width. Heavy and stable piece. Made in Italy.
Can be used in support stands, sconces, or on a table top. Best fit is for holders with a 5 inch ring...
|
|
|
$44.99
1 available |
Waterford Crystal 8 inch Serving Bowl Quadrata Etched Blocks
Elegant centerpiece or serving vessel, this 8 inch wide crystal Quadrata bowl makes a dramatic contemporary statement. Deep beveled cuts run vertically from top to bottom, intersected near the top by two horizontal band of squares, the lower band further highlighted by a small etched square. Dimensions are 7 5/8 across the top rim and 5.75 high. The bowl swells out to an 8 inch width around it's center. Made in Poland. Hand wash and dry.
|
|
|
$24.99
1 available |
Hanging Candle Holder Bowl Crackle Glass 7 7/8 x 4
Replacement glass bowl candle holder, shaped to fit into metal type ringed holders for candles. Hand blown and crackled, clear. Measures approximately 7 7/8 inches across the top rim x 4 inches deep and can vary up to 1/8 inch in size. Fits in support rings that measure 6 - 6.75 inches (inner diameter measurement).
|
|
|
$18.99
1 available |
Hurricane Shade 1.75 inch fitter x 7.75 x 4.75 Clear Glass Ribbed Flared Rim
Hand blown, flared, and lightly ribbed glass replacement shade for your sconce, lamp, or candle holder. Elegant design featuring light vertical ribbing. Very dainty shade, lightweight. Bottom fitter edge measures 1.75 inches across. Flared top edge measures approximately 4.75 inches across and stands 7.75 inches tall.
Height: 7.75 inches tall
Width of Fitter end: 1 5/8 inches across
Height of fitter: .75 inch
Top Diameter: 4.75 inches across
|
|
|
$18.99
1 available |
Hanging Candle Holder Clear Heavy Glass 6 5/8 x 5.25 Wide Flared Rim HCH111
Replacement glass candle holder, shaped to fit into chandeliers or other metal type ringed holders for candles. Hand blown, clear, and flared at the rim. Heavy weight with round bottom. Generic holder, Suitable for votives or thin pillars. Measures 5.25 inches across the top rim, and stands 6 5/8 inches tall.
Fits in support rings that measure 3.5 inches (inner diameter).
|
|
|
$24.99
1 available |
Hurricane Sleeve Heavy Glass Gothic Crystal 7 1/8 x 3.25
Glass replacement shade/sleeve for your candle holder, Chandelier, or centerpiece. Crystal glass is clear with beveled design that runs vertically from bottom to top in the shape of Gothic arches. Open on both ends.
Hurricane Sleeve stands 7 1/8 inches tall. Top and bottom rim measures 3.25 inches in width. Meant to be used on a flat or recessed base or with a small pillar, candlestick or floral display inside.
|
|
|
$9.99
2 available |
Peg Votive Candle Holder Crackle Glass Heavy Ball
Height: 3.75 inches including stem
Width: 3.25 inches
Ball shaped style in crackled glass and curbed rim
Color: Clear
Material: glass
Classy retro style peg votive holder makes a statement and will add beauty to your wall sconces or candle sticks and add a warm glow when used with a candle. I have brass rings that fit on the rim of this holder I can include if customer requests it at time of purchase.
|
|
|
$9.99
2 available |
Hanging Candle Holder Teardrop 5.5 inches x 3.25 inches HCH110
These beautiful glass holders can be used for replacing a wall vase or candle holder that is supported by a metal ring. Clear glass, hand blown, shaped down to a teardrop shaped point. Very elegant and really dresses up your sconces or candle holder that will accommodate them.
Type: Replacement
Material: Glass
Height: 5.5 inches h
Width: 3.25 inches w
|
|
|
$29.99
1 available |
Hurricane Shade Sleeve Cylinder 9 1/8 inches tall x 4.75 Hand Blown Clear Glass
Glass Hurricane shade/sleeve for your candle holder or centerpiece.
Open ended cylinder measures 9 1/8 inches tall. Top and bottom rim diameter is 4.75 inches. Meant to be used on a flat base or with a candlestick or pillar.
|
|
|
$29.99
2 available |
Wrought Iron Wall Sconce Candle Holder / Vase XL
Wrought Iron Wall Sconce with glass hurricane candle holder / vase for indoor or outdoor use. Unit measures 26 inches tall x 9 inches at it's widest point. Glass insert sits on base.
|
|
|
$24.99
2 available |
Hurricane Shade Cylinder Sleeve Heavy Crackle Glass 8.75 x 3 5/8
This eye catching glass cylinder is beautifully handcrafted in clear, heavyweight crackle glass, it stands 8.75 inches tall and measures 3 5/8 inches across the rim. Great accent for elegant table settings or replacement in wall sconces.
|
|
|
$9.99
2 available |
Hanging Candle Holder Teardrop Home Interiors 5.25 x 3 HCH105
This beautiful glass teardrop style holder can be used for replacing a wall vase or candle holder that is supported by a metal ring. Clear, hand blown, shaped down to a point. Very elegant and really dresses up your sconces or candle holder that will accommodate them. 5.25 inches h x 3 inches w at the rim.
Will fit in rings that measure 2.25 inches to 2.5 inches.
|
|
|
$9.99
1 available |
Hurricane Shade 2 7/8 inch Fitter x 8.5 x 2 Clear Bulbous 3.25 inches w
Hand blown glass replacement shade for your sconce, lamp (oil or electric) or candle holder. Clear Bulbous shape with straight chimney top. Bottom fitter edge measures 2 7/8 inches across, and will fit inside of an 3 inch holder/opening. Chimney top edge measures 2 inches across and stands 8.5 inches tall. Shade is 3.25 inches at ti's widest point.
|
|
|
$9.99
3 available |
Hanging Candle Holder Clear 4 1/8 W x 3 7/8 H Flat Bottom HCH108
Handblown glass candle holder, shaped to fit into chandeliers or other metal type ringed holders for candles. Hand blown, clear, and flared at the rim.
Measures approximately 3 7/8 inches h x 4 1/8 inches w and can vary up to 1/8 inch in size.
Fits in rings that measure 3.5 inches (interior measurement).
|
|
|
$24.99
2 available |
Opal Glass Lamp Shade Ribbed White 8 inch fitter width x 5 5/8 inch high
Beautiful vintage lamp shade for Student desk lamp or table fixture. Molded in a vertical ribbed pattern, banded at the top with a sloped and curbed rim. This style of shade is also sometimes used with a hurricane chimney shade inside of it.
Thick and heavy glass. Shade has an 8 inch base fitter and stands 5 5/8 inches high. The opening in the center is 2.5 inches to accommodate a glass chimney.
See all images below that show measurements as well as other highlights.
|
|
|
$6.99
1 available |
Home Interiors Peg Votive Candle Holder Dark Olive Green Hobnail
Hobnail pattern like raised dots define the appearance of this pretty peg votive candle holder. This holder is a vintage one, and getting harder to find.
Color: Dark Olive Green
Brand: Homco / Home Interiors
Height: 3.5 inches, including stem
Width: 2.875 inches
Material: Glass
|
|
|
$12.99
1 available |
Hanging Candle Holder Crackle Glass Clear 3.25 x x 3.5 h HCH103
Hanging Candle Holder perfect for replacement purposes. This elegant holder is crackle glass with a curbed rim which measures 3.25 inches across the top and stands 3.5 inches high. Medium weight with round base. Appropriate for holders with a 2.5 inch ring (interior ring measurement).
|
|
|
$12.99
1 available |
Hanging Candle Holder Crackle Glass Clear Partylite HCH102
Hanging Candle Holder perfect for replacement purposes. This elegant holder is 3/4 crackle glass with a flared rim which measures 3 1/8 inches across the top and stands 3.25 inches high. Medium weight with round base. Appropriate for holders with a 2 5/8 to 2.75 inch ring (interior ring measurement).
|
|
|
$14.99
1 available |
Hanging Candle Holder Flared Rim with Knob 3 7/8 w x 4 h Green HCH101
Glass candle holder shaped to fit into metal type ringed holders for candles. Suitable for stands or chandeliers. Hand blown, with flared rim. Knob accent on the bottom. Holder has a light green tint in the glass. Measures 4 inches h x 3 7/8 inches w across the top rim. Fits in rings that measure 3 inches. (Interior diameter of support ring)
|
|
|
$24.99
1 available |
Hanging Crackle Glass Candle Holder / Vase Clear 5.75 inches x 5.5
Hanging Candle Bowl in clear crackle glass - Measures 5.75 inches h X 5.5 inches w. at the top rim. For use with votives or small pillars or flowers if used as a vase. Flared rim at the top.
Suitable for use in a wall holder or metal frame with a 4.25 - 4.75 inch ring. Holder has a flat bottom and can sit freely on it's own as well.
|
|
|
$9.99
Unavailable |
Peg Votive Candle Holder Frosted Tulip White Pointed Tips 6 Petal
Frosted Peg Votive Candle Holder, Highly detailed tulip design with pointed tips. This votive holder has a graceful flare,with vertical petals that extend upward to the pointed tips.
Height: 4 inches (including stem)
Width: 5 inches
Color: Frosted white
Material: glass
Made in Mexico
|
|
|
$17.99
2 available |
Glass Lamp Shade White Bell Shape 2 1/8 inch fitter 5.5 H x 6.75 W
Beautiful vintage bell shaped lamp shade in white glass for pendants or table top lamps that secure with a cap that covers the shallow fitter neck. Shade measures 5.5 inches high x 6.75 inches wide with a 2 1/8 inch fitter that is very short.
See images for more clarity.
|
|
|
$7.99
8 available |
Hanging Candle Holder Frosted Crock for 2 3/8 - 2.5 inch rings HCH099
Adorable miniature crocks in frosted glass, these flat rim holders are perfect for Candle Chandeliers, stands or even table top use. They measure 2.75 inches wide at the top and stand 2.75 inches tall. Perfect holder for tealights or standard votives.
Fits in support rings that measure from 2 3/8 - 2.5 inches (inner diameter measurement) See Long Description for more info.
|
|
|
$29.99
1 available |
Hurricane Shade Sleeve Cylinder 9 7/8 inches tall x 4.5 Hand Blown Clear Glass
Glass Hurricane shade/sleeve for your candle holder or centerpiece.
Open ended cylinder measures 9 7/8 inches tall. Top rim diameter is 4.5 inches and bottom rim diameter is nearly 4 5/8 inches in diameter because the glass is thicker on the bottom. Meant to be used on a flat base or with a candlestick or pillar.
|
|
|
